References · Water supply and sewerage · Albania

Detailed Design for the Water Supply Systems for Berat Municipality (Ref. REF-57923-05-12-2020) — Lapardha 1, Duhanas, Orizaj and Otllak

Client
SH.A. Ujësjellës-Kanalizime Berat-Kuçovë
Location
Municipality of Berat, Albania
Service
Design
Period
September 2020 – December 2020
Status
Completed
Reference no.
2020-007

The project

Berat is located in the south of the country, 120 km south of Tirana. The project is divided into four different territorial areas of the Municipality of Berat: Lapardha 1, Orizaj and Otllak (Otllak administrative unit), the village of Duhanas (Velabisht administrative unit) and the Informal Zone in the city of Berat.

The Consultant prepared the implementation design for: the water supply of the village of Lapardha 1, with gravity supply from the new DN200 transmission main 1,500 m long, a secondary line of about 2,388 m, a tertiary line of about 4,704 m and 420 house connections; the water supply of the village of Duhanas, divided into two pressure zones, with a new HDPE DN 110 mm PN 16 transmission main 3,381 m long, a new reservoir V = 200 m³ at an elevation of 180 m, a booster pump Q = 4.2 l/s and H = 52 m, a secondary line of about 4,105 m, a tertiary line of about 5,264 m and 540 house connections; the distribution network for the Orizaj-Otllak area, supplied from the new DN200 main at Kombinat, with three new chambers, a secondary line of about 666 m, a tertiary line of about 8,929 m and 419 house connections; as well as the Informal Zone of the city of Berat, divided into two zones, with the reconstruction of the feeder line over 360 m, a secondary line of 1,606 m, a tertiary line of 3,626 m and 350 m of house connection pipework.

The measures of the project contribute to the sustainable development of the villages by improving the living conditions of the population and reducing the health risk of the inhabitants and visitors.

What we did

SRP Albanian Engineering is responsible for the design of the water supply measures. The implementation design comprises: the Technical Report; the Technical Specifications; the Bill of Quantities; the Cost Estimation; the Technical Drawings; the Environmental Impact Assessment Report.

Your project

Planning something similar?

Tell us where you stand. We will come back with the team and the first steps.

Some parts of this page have not been translated into English yet and are shown in the original language.